How to Connect Tonewinner Audio Speakers and Amplifier System

The following will describe the connection method of the audio system in two cases. The first is to connect the integrated power amplifier directly after the sound source comes out, and then connect to the speaker, the second is to connect the front-stage power amplifier after the sound source comes out, then connect to the rear-stage power amplifier, and finally connect to the speaker.

First. Come out of the audio signal source (such as TY-1CD, TY-i30, TY-30, TY-50 cd player, etc.), connect it to the integrated power amplifier (such as 66D, 86D, 2PRO, 3PRO AD-1PA power amplifier stereo, etc.) with a connecting cable, and then connect it to the speaker Connected, that is, the sound source combined power amplifier speaker has the following connection methods:

• Prioritize digital signal connection. For example, from the digital signal output port DIgital OUT behind the back panel of TY-1CD, use an optical fiber cable from the optical fiber (OPT) or use a coaxial cable from the coaxial (COAX) output port, and connect the other end to the optical fiber or coaxial input of AD-2PRO Port Digital In (if there are multiple sets of optical fiber and coaxial output and input, connect optical fiber 1 output to optical fiber 1 input, coaxial 1 output to coaxial 1 input), and then use the speaker cable to connect the power output port of AD-2PRO to the speaker , the left and right channels are respectively connected to the positive and negative interfaces of the left and right channels of the speaker.

• Connect the Analog Output analog signal output port of TY-1CD with a lotus cable (red to red, white to white), the other end of the line is connected to the Analog In analog signal input port of AD-2PRO, the left channel is connected to the left channel, Right channel to right channel. Then use the speaker cable to connect the positive and negative interfaces of the left and right channels of the speaker from the power output end of AD-2PRO, and the left and right channels respectively.
• Use a balanced signal cable to connect to the BAL interface of the Analog Output analog signal output port of TY-1CD. BAL-L is the left channel, and BAL-R is the right channel, respectively connected to the Analog In analog signal of AD-2PRO The BAL interface in the input port, the BAL-L left channel corresponds to the left channel, and the BAL-R right channel corresponds to the right channel. Then use the speaker cable to connect the positive and negative interfaces of the left and right channels of the speaker respectively from the output end of the AD-2PRO, and the left and right channels. As shown below:
• From the audio signal source (such as TY-1CD, TY-i30, TY-30, TY-50, etc.) to the pre-amplifier (such as AD-1PRE, AD-8PRE, etc.) Such as AD-1PA, AD-8PA, etc.), and finally connect the speaker (such as TD-8). That is, the sound source, the pre-amplifier, the post-amplifier, and the speaker. Taking TY-i30+AD-1PRE+AD-1PA+Tongdi No. 3 as an example, there are the following connection methods:
• Prioritize digital signal connection. For example, from the digital signal output port DIgital OUT behind the back panel of TY-i30, use an optical fiber cable from the optical fiber (OPT) or use a coaxial cable from the coaxial (COAX) output port, and the other end is connected to the optical fiber or coaxial input of AD-1PRE Port Digital In (if there are multiple sets of optical fiber and coaxial output and input, connect optical fiber 1 output to optical fiber 1 input, and coaxial 1 output to coaxial 1 input). Then use the balanced signal cable to connect the balanced output interface of AD-1PRE to the balanced input interface of AD-1PA. Or connect the AD-1PRE analog output interface (lotus signal line) to the AD-1PA analog input interface (red to red, white to white) with a lotus signal cable. Finally, connect the speaker cable from the power output end of AD-1PA to the speaker, and connect the left and right channels to the positive and negative interfaces of the left and right channels of the speaker respectively.

• Connect the Analog Output analog signal output port of TY-i30 with a lotus cable (red to red, white to white), and the other end of the line to the Analog In analog signal input port of AD-1PRE (red to red, white to white) . Then use the analog signal line to connect the AD-1PRE's hifi preamplifier analog output interface Analog Out to the AD-1PA's analog input interface. Finally, from the power output end of AD-1PA, the left and right channels are respectively connected to the positive and negative interfaces of the left and right channels of the speaker.

• Use a balanced signal cable to connect to the BAL interface of the Analog Output analog signal output port of TY-i30. BAL-L is the left channel, and BAL-R is the right channel, respectively connected to the Analog In analog signal of AD-1PRE. The BAL interface in the input port, the BAL-L left channel corresponds to the left channel, and the BAL-R right channel corresponds to the right channel. Then connect the balanced output port BAL interface of AD-1PRE to the balanced input interface of AD-1PA, the left channel of BAL-L corresponds to the left channel, and the right channel of BAL-R corresponds to the right channel. Finally, the power output port of AD-1PA is connected to the speaker with a speaker cable, and the left and right channels are respectively connected to the positive and negative interfaces of the left and right channels of the speaker.