Tonewinner wireless transmitter and bluetooth receiver wholesale

Overview of W-1T·W-1R High Quality Wireless Transceiver

1. Product introduction

ToneWinner W-1·TW-1R is a wireless transceiver specially designed for wireless cinema, wireless background music, wireless conference and other audio systems. It integrates signal transmission, signal reception and power amplification. The stereo signal is transmitted through the W-1T, and then received and amplified by the W-1R to the speaker. It has the characteristics of high fidelity and low delay. The barrier-free receiving distance between the transceivers is up to 40 meters, and the DC power supply is stable and safe. The fuselage is small and light, takes up little space, and is convenient to store and use. It can easily solve wiring problems in living rooms and conference rooms.

2. Appearance characteristics

W-1T and W-1R are two independent 10cm*10cm black boxes, which are made of black high-brightness casting process. The body is bright and smooth, which is suitable for various home environments.

The circuit adopts a four-layer precision circuit manufacturing process. The chips of W-1T and W-1R are high-quality main control chips Everestek 1T2A and Everestek 12A respectively. They support 24-bit high-quality stereo sound, and the FR frequency is as high as 5.8/5.2GHz. It transmits large stream and almost lossless audio signals, and the signal transmission delay is less than 17MS, which is almost negligible. The data transmission process is stable, the anti-interference ability is strong, and the signal conversion is fast and stable.

3. How to use

W-1T provides LINE OUT (analog L/R audio) output, W-1R adopts professional phoenix interface, which is very convenient to operate and use. The specific use methods are as follows:

1. Connect the W-1T to the signal output port of the power amplifier and CD player, and connect the W-1R to the speaker;

2. Press and hold the PAIR button of the W-1T for a few seconds, when the blue signal light starts to flash slowly and quickly, it enters the pairing mode;

3. Press and hold the PAIR button of the W-1R for a few seconds, when the blue indicator light is always on, it means the pairing is successful;

4. Connect the transceiver to the power supply and it can be put into use.

After the transceiver is paired successfully, it will automatically enter the pairing state next time, which is very convenient.

The W-1R accepts two signals, which means you can connect two speakers.

4. Main parameters of the product

Power: 20W×2

Rated impedance: 8Ω

Voltage: W-1T (5V 1A) / W-1R (20V 2A)

Power frequency: 50Hz±2Hz

Power adapter: 220V

Appearance color: black

Net weight: W-1T0.14kg/W-1R0.15Kg

Overall size: W-1T/R 100×100×32mm (W×D×H)

Use occasions: background music, cinema, conference, etc.